Shield SMSc Micro Red Dot - 4 M.O.A.

For my MDs-Mod 2, I used the short screws and a washer under the screw head. My issue was removing the cover plate. Heat with a soldering iron for one minute or you will strip the screw heads. Then use a T-10 hand screw driver. I assumed it used a hex head--my eye sight was not good enough to discern the shape. That will get the old plate off. Be sure to have some blue locktite to set the new screws. Save the cover plate. I'm not sure this will hold up.

Excellent product, easy to install. I do not have a bore sight, so i had to zero it at the range. Took a few shots to center and once done was very easy to use.

Perfect Red Dot for my Hellcat CCL.

The site works well, the issue is the instructions are lacking. Adjusting the site using the videos is lacking specificity. It says turn X number of clicks but doesn’t clarify which way to turn the dial. Dial has some instructions but they aren’t clear as to define if the turn that’s says Left means to move the site to the left or away from a left cluster. For almost $300 I would have like some more comprehensive instructions

Very nice red dot. Easy to install.

I bought for my Hellcat Pro and I am not disappointed once mounted using a Fat Max Torques scredriver too 15 inch pounds and little blue lock tite this site is dead on great by and glass lens too boot ...

Not as bright as I had hoped it would be.

Fits perfect and red dot once zeroed is spot on...highly recommend.

easy installation, easy adjustment, like that it came with hex keys, looks great on my Hellcat.